AP450L(oil)
Screw-less Drive & Highly Rigid Gantry Structure Equipped with Latest SPW Power Supply Realized High-speed Machining in Oil Bathed Wire-cut EDM
* The picture shown may slightly differ from the actual machine.
Main Features
- Screw-less Drive & Gantry Structure
- Adoption of the linear motor drive and low center of gravity gantry column which realizes high speeds and dynamic responsiveness, minimizes the machine displacement due to the weight transfer which greatly improved the positioning and machining accuracy. Adoption of a high precision machining fluid cooling unit, air circulation system and etc., also realizes stable high precision machining immediately after the machine is started.
- New Power Supply Unit & High-speed Machining
- Has a 19-inch horizontal type touch panel, realizing the most up-to-date man-machine interface and also ensuring ease of viewing and ease of use. Equipped with "High-speed Eco-Cut O-Plus" which realizes high speed performance in minute areas in oil bathed wire-cut EDM.
- Improved Workability and Operability
- Improved the workability during setup with the automatic wire threading unit FJ-AWT, three-sided automated vertical drop machining tank, concentrated layout of the valves and flow meters, and the movable operation panel. The maintainability has also been improved, as the filter can be replaced from the front side of the machine.
Automation System Special Site
Products
Axis stroke X×Y×Z (mm) | 450 x 300 x 120 |
---|---|
U x V axis travel (mm) | 35 x 35 |
Max. taper angle | ±7°(plate thickness:100mm) |
Max. workpiece dimensions(During flushing machining) W x D x H (mm) | 600 x 400 x 100 |
Max. weight of workpiece(During flushing machining)(kg) | 100 |
Wire electrode diameter (mm) | 0.05 ~ 0.25 |
Wire tension (N) | 3 ~ 25 |
Maximum wire feed rate (mm/sec) | 250 |
Distance from floor surface to upper surface of table (mm) | 1084 |
Machine tool dimensions W x D x H (mm) | 2185 x 2015 x 2160 |
Machine installation dimensions W x D (mm) | 3800 x 3450 *1 |
Total unit weight(kg) | 6300 *2 |
Total power input | 3-phase 50/60Hz 13 kVA |