LMI450
Injection Molding of Magnesium Die Cast Products now Available Realizes innovative good quality product range, work environment and safety
* The picture shown may slightly differ from the actual machine.
Main Features
- V-LINE® Direct Casting
- This machine consists of a ground-breaking structure in which the precision moulding technology cultivated for the two-cylinder type V-LINE® to magnesium. It has good fluidity and can be molded into thin-walled and complicated shapes. In addition, since the pressure is directly transmitted to the molten metal by holding pressure, the rate of non-defective products is improved.
- New material Moulding of Magnesium Lithium(Mg-Li） is possible
- Mg-Li has the same strength as a magnesium alloy, and has a specific gravity of 75% that of a magnesium alloy. Since it becomes active in the molten state, it was considered difficult to die-cast, but we have realized from melting to molding by the melting method in a closed structure.
- Improves Work Environment and Safety
- A certain amount of material is melted in the cylinder, and a high level of safety is ensured because it does not use a melting furnace like die casting. In addition, since the material supplied is a billet, there is no danger of ignition.
Products
| Clamping system | Locking Direct Pressure |
|---|---|
| Max. clamping force (kN) | 4410 |
| Tie bar distance W×L (mm) | 820 x 820 |
| Platen Dimensions W×L (mm) | 1140 x 1140 |
| Open daylight (Min. mould thickness + Max. stroke) (mm) | 1240 |
| Min. mould thickness/Max. mould thickness (mm) | 340/900 |
| Plasticization and Injection System | V-LINE®Direct Casting |
| Plunger diameter （mm） | 90 | 120 |
| Max. injection pressure （MPa） | 50 | 40 |
| Theoretical injection volume (cm<sup>3</sup>) | 826 | 1810 |
| Injection rate (cm<sup>3</sup>/s) | 31808 | 33929 |
| Max. injection speed （mm/s） | 5000 | 3000 |
| Machine size L×W×H (mm) | 9440 (Including Separate Heater Control Box) x 1965 x 2770 |
| Machine weight （kg） | 21000 | 22000 |
| Mould Clamping Force Classification | 200-499 |
| Drive system | Electric Hybrid |
| Mg Material Diameter(mm) | 90 | 120 |