AX350L NEW
Contributing to the Ultra-precision Molds for the Mobility and Mobile Electronics Industries, Including Molds for Manufacturing Motor Cores and Lead Frames
* The picture shown may slightly differ from the actual machine.
Main Features
- Up to 150 hours of Continuous Automatic Operation
- The machine is equipped as standard with all the technologies required for the long-hour continuous operation in the plate machining of precision press dies, including 4-axis linear motor drive, gantry structure, suspended arm structure, ceramic parts, temperature control system, and oil machining fluid.
- Super-finishing & High-speed Machining Circuits Super finishing circuit
- Super finishing circuit "Super PIKA Oil" provides excellent surface roughnes for dies and precision parts. HS Control also allows for shorter machining times and greatly reduced numbers of cuts at Rz of 1μm or less.
- Environmentally Friendly Manufacturing Sustainable Production
- The wire rotation mechanism "i groove" reduces wire consumption during finishing. In addition, a fluid treatment circuit that monitors the vertical jet flow rate during machining to reduce the pump drive energy required for machining fluid treatment is included as standard equipment.
Products
| Axis stroke X×Y×Z (mm) | 350 x 350 x 120（+100mm） *1 |
|---|---|
| U x V axis travel (mm) | 80 x 80 |
| Max. taper angle | ±15° (Thickness : 100 mm) |
| Max. workpiece dimensions（During flushing machining） W x D x H (mm) | 540 x 500 x 100 |
| Max. weight of workpiece（During flushing machining）（kg） | 300 |
| Wire electrode diameter (mm) | 0.05 ～ 0.25 |
| Wire tension (N) | 3 ～ 25 |
| Maximum wire feed rate (mm/sec) | 250 |
| Distance from floor surface to upper surface of table (mm) | 950 |
| Machine tool dimensions W x D x H (mm) | 1600 x 2470 x 2185 |
| Machine installation dimensions W x D (mm) | 3650 x 3000 *2 |
| Total unit weight（kg） | 4500 |
| Total power input | 3-phase, 50/60 Hz, 13 kVA |