ALN600Q "i Groove Edition" NEW
First in the world ! Wire Rotation Mechanism "i groove"
Achieving the superlative performance with in-house developed core technologies
* The picture shown may slightly differ from the actual machine.
Main Features
- More efficient and environmentally friendly finishing of thick plate workpieces.
- Wire Rotation Mechanism "i groove"
Applying rotation to the wire during finishing reduces wire consumption and allows a new wire surface to be constantly used for finishing from the top to the bottom of the workpiece.
This is especially suited to finishing thick plate workpieces. It offers innovative machining performance including stable machining dimensions, improvement of surface scoring, and reduced wire consumption.
New groove and step machining function "Stepcut"
It permits machining at the same speed as under standard conditions while significantly improving the accuracy and range of applications when machining shapes with rapidly changing material thickness, such as stepped shapes. - Latest Electrical Discharge Technology for Rapid and Accurate Machining
- Sodick has been working for many years to develop the world's best wire-cut electric discharge machines. The AL Series "i Groove Edition" offers flexible control from high peak currents for efficient rough machining to ultra-fine discharge pulses for micro finishing.
In addition, The Sodick linear motor drive is a non-contact system that eliminates the need for ball screws. It is maintenance-free and maintains its initial accuracy almost indefinitely, with no drop off in machine accuracy due to ball screw wear throughout the life of the machine (10 years or more). - Temperature-synchronized machine
- All models in the series are equipped as standard with the AIM (AI Maintenance) environmental temperature diagnosis function and TH COM thermal displacement correction function that can handle everything from high-accuracy to rough temperature environments, in addition to a logging function and temperature display of the machine surroundings.
The newly designed service tank provides a more stable machining environment and improves ease-of-maintenance.
The new service tank has a three-tank structure that completely separates fresh water and the machining fluid after use.
It prevents sludge contamination during machining and provides a more ideal machining environment."
A digital sensor has been newly installed to constantly monitor the filter pressure data and display an alert when filter replacement is necessary.
This allows the operator to machine with confidence and to estimate when filter replacement is due by checking the filter pressure trends on a graph.
Products
| Work tank inner dimensions W x D (mm) | 1050 x 840 |
|---|---|
| Axis stroke X×Y×Z (mm) | 600 x 400 x 350 |
| U x V axis travel (mm) | 150 x 150 |
| Max. taper angle | ±25°(plate thickness：130mm) |
| Max. workpiece dimensions（During flushing machining） W x D x H (mm) | 800 x 570 x 340 |
| Max. workpiece dimensions（During submerged machining） W x D x H (mm) | 800 x 570 x 280 |
| Max. weight of workpiece（During flushing machining）（kg） | 1000 |
| Wire electrode diameter (mm) | 0.1 ～ 0.3 *1 |
| Wire tension (N) | 3 ～ 23 |
| Maximum wire feed rate (mm/sec) | 420 |
| Distance from floor surface to upper surface of table (mm) | 995 |
| Machine tool dimensions W x D x H (mm) | 2525 x 2760 x 2295 *2 |
| Machine installation dimensions W x D (mm) | 3775 x 4060 *3 |
| Total unit weight（kg） | 4200 *4 |
| Total power input | 3-phase 50/60Hz 13 kVA |