AL800P "i Groove + Edition" NEW
Novel Construction and System That Minimize Thermal Displacement.
Achieves Higher-precision and Faster Machining of Large Parts and Molds.
* The picture shown may slightly differ from the actual machine.
Main Features
- 4-Axis (XYUV) Linear Motor Drive
- High-performance linear motors developed and manufactured by Sodick are adopted for the four XYUV axes. They can maintain accurate axis movement with no backlash semi-permanently, something that is impossible with conventional ball screw drive methods. The high response and high tracking performance that are features of linear motors achieve accurate position control and excellent discharge characteristics during machining.
- High Rigidity Construction and Precision Thermal Compensation System
- The AL800P adopts a high rigidity construction supported by the ultra-precise roller guide as well as featuring a machining fluid circulation system for major structural components. In addition, a newly developed high-precision thermal compensation system and automatic temperature control by a high-performance inverter cooler minimize the thermal displacement during high-precision machining of large workpieces.
- Eco-friendly
- The wire rotation mechanism (i groove) always performs finish machining with a wear-free wire surface, enabling uniform machining from the top to the bottom of the workpiece. Reduces wire consumption while reducing streaks and irregularities during finishing of thick workpieces. In addition, a newly developed energy-saving pump system has been adopted for the dielectric tank, reducing power consumption.
Products
| Work tank inner dimensions W x D (mm) | 1410 x 1110 |
|---|---|
| Axis stroke X×Y×Z (mm) | 800 x 600 x 250 |
| U x V axis travel (mm) | 150 x 150 |
| Max. taper angle | ± 25° (plate thickness: 130 mm) |
| Max. workpiece dimensions（During flushing machining） W x D x H (mm) | 1250 x 1020 x 240 |
| Max. weight of workpiece（During flushing machining）（kg） | 1500 |
| Wire electrode diameter (mm) | 0.1 ～ 0.3 |
| Wire tension (N) | 3 ～ 23 |
| Maximum wire feed rate (mm/sec) | 420 |
| Distance from floor surface to upper surface of table (mm) | 995 |
| Machine tool dimensions W x D x H (mm) | 3300 x 3650 x 2415 |
| Machine installation dimensions W x D (mm) | 4580 x 5050 |
| Total unit weight（kg） | 5750 |
| Total power input | 3-phase, 50/60 Hz, 13 kVA |