AL800G "i Groove + Edition" NEW
Achieving the superlative performance with in-house developed core technologies Advanced Smart Pulse & Advanced Smart Linear
* The picture shown may slightly differ from the actual machine.
Main Features
- 4-axis linear motor drive
- Direct drive method without a ball screw was established, utilizing a high performance linear motor developed and manufactured in-house for the 4 axes of X, Y, U and V. Precise axis movements without backlash can be maintained semi-permanently. Demonstrates accurate position control and excellent discharge characteristics while machining, through the high response and high following characteristics which are the features of the linear motor.
- New Power Supply Unit & New Machining Circuit
- Providing the improved visibility and operability with the latest man-machine interface achieved
by the 19" horizontal touch-panel.
This machine is standardly equipped with the "barrel-free effect control Ⅱ" which greatly reduces the barrel amount during machining, and "TMP Control Ⅱ" which improves the surface roughness of the second cut and realizes high speed finish machining. - Eco-friendly
- The wire rotation mechanism (i groove) always performs finish machining with a wear-free wire surface, enabling uniform machining from the top to the bottom of the workpiece. Reduces wire consumption while reducing streaks and irregularities during finishing of thick workpieces. In addition, a newly developed energy-saving pump system has been adopted for the dielectric tank, reducing power consumption.
Products
| Axis stroke X×Y×Z (mm) | 800 x 600 x 500 |
|---|---|
| U x V axis travel (mm) | 200 x 200 |
| Max. taper angle | ± 25 °（plate thickness：130 mm) |
| Max. workpiece dimensions（During flushing machining） W x D x H (mm) | 1250 x 1020 x 500 |
| Max. weight of workpiece（During flushing machining）（kg） | 3000 |
| Wire electrode diameter (mm) | 0.1 ～ 0.3 |
| Wire tension (N) | 3 ～ 23 |
| Maximum wire feed rate (mm/sec) | 420 |
| Distance from floor surface to upper surface of table (mm) | 995 |
| Machine tool dimensions W x D x H (mm) | 3395 x 3640 x 2780 *1 |
| Machine installation dimensions W x D (mm) | 4675 x 5050 |
| Total unit weight（kg） | 6000 *2 |
| Total power input | 3-phase 50/60 Hz 13 kVA |