AL400P "i Groove + Edition" NEW
Newly developed Digital HF control, wire rotation mechanism, energy-saving pump Ultra-precision premium model ideal for progressive press dies, etc.
* The picture shown may slightly differ from the actual machine.
Main Features
- High Precision Premium Specification, Pursuing Ultimate Accuracy
- Sodick pursued ultra-high precision in the machining, assembly and adjustment of machinery. By adopting ultra-high precision roller guides, high rigidity was also achieved.
While standardly equipped with doors made of CFRP, the accuracy was thoroughly pursued in all factors originating in the machining accuracy to temperature control by a high quality inverter cooler. - Improved Machining Speed
- Newly developed Digital HF control is adopted. By constantly digitally monitoring the status during machining and maintaining optimum discharge conditions, the controller simultaneously improves machining speed and accuracy. By constantly monitoring the discharge state during machining, stable machining can be maintained at all times, even with changes in water quality or plate thickness.
- Eco-friendly
- The wire rotation mechanism (i groove) always performs finish machining with a wear-free wire surface, enabling uniform machining from the top to the bottom of the workpiece. Reduces wire consumption while reducing streaks and irregularities during finishing of thick workpieces. In addition, a newly developed energy-saving pump system has been adopted for the dielectric tank, reducing power consumption.
Products
| Work tank inner dimensions W x D (mm) | 850 x 610 |
|---|---|
| Axis stroke X×Y×Z (mm) | 400 x 300 x 250 |
| U x V axis travel (mm) | 150 x 150 |
| Max. taper angle | ±25°(plate thickness：130mm) |
| Max. workpiece dimensions（During flushing machining） W x D x H (mm) | 600 x 470 x 240 |
| Max. workpiece dimensions（During submerged machining） W x D x H (mm) | 600 x 470 x 230 |
| Max. weight of workpiece（During flushing machining）（kg） | 500 |
| Max. weight of workpiece（During submerged machining）（kg） | 350 |
| Wire electrode diameter (mm) | 0.05 ～ 0.3 *1 |
| Wire tension (N) | 3 ～ 23 |
| Maximum wire feed rate (mm/sec) | 420 |
| Distance from floor surface to upper surface of table (mm) | 995 |
| Machine tool dimensions W x D x H (mm) | 2190 x 2605 x 2230 |
| Machine installation dimensions W x D (mm) | 3425 x 3850 |
| Total unit weight（kg） | 3400 |
| Total power input | 3-phase 50/60 Hz Normal Use 9 kVA Maximum Use 13 kVA *2 |