Precise and stable molding by the V-LINE® and direct pressure mold clamping further increased the high-value added to medium and large-sized molded products
* The picture shown may slightly differ from the actual machine.
- V-LINE® Electric Hybrid
- The features of the medium sized electric hybrid machine are the integrated V-LINE® and direct pressure mold clamping developed in-house, which realizes high precision and stable molding with accurate and high repeatability.
- Shot capacity 1000 cc
- A theoretical shot capacity specification of 1000 cc was added to the lineup. This specification achieves a high-speed and high pressure shot capacity, which expanded the molding range of thicker and deeper products.
- Mold Opening Assist Function
- Utilizing the mold clamping cylinder return mechanism, a new mold opening assist function which generates an initial opening force up to 294 kN was developed. This function realized a mold opening force of six times more than a conventional machine, which allows for easy and reliable molding of thicker and deeper products with high mold release resistance.
|Clamping system||Locking Direct Pressure|
|Max. clamping force (kN)||3430|
|Tie bar distance W×L (mm)||820 x 820|
|Platen Dimensions W×L (mm)||1140 x 1140|
|Open daylight (Min. mold thickness + Max. stroke) (mm)||1350|
|Min. mold thickness/Max. mold thickness (mm)||450/950|
|Plasticization and Injection System||Screw Pre-plasticizing|
|Screw diameter （mm）||50 | 50L | 66|
|Plunger diameter （mm）||50 | 60 | 60L|
|Max. injection pressure （MPa）||219.5 | 166.6 | 197|
|Theoretical injection volume (cm3)||392 | 621 | 1017|
|Injection rate (cm3/s)||589 | 847 | 565|
|Max. injection speed （mm/s）||300 | 200|
|Plasticating capacity （kg/h）||100 | 110 | 190|
|Machine size L×W×H (mm)||6575 x 1760 x 2246|
|Machine weight （kg）||16000|
|Mold Clamping Force Classification||200-499|
|Drive system||Electric Hybrid|