LP10EH4 NEW
Ideal for Micro & Precision Small Parts
V-LINE® High Response Injection Moulding Machine for High Value Added Products
* The picture shown may slightly differ from the actual machine.
Main Features
- Industry-Leading Rise and Fall Speeds
- Low-inertia plunger and LDDV achieve industry-leading rise acceleration of 15.3G and a fall time of 5 msec (in the case of P12). The iX controller, developed in-house, also provides optimal and complete control of the injection plunger.
- High-cycle precision stable moulding with V-LINE®
- The V-LINE®'s separate structure for the injection and plastification sections allows for stable plastification, metering, and injection, enabling high-cycle, stable moulding of precision small parts like connectors.
- Operation and management of peripheral equipment with M2M on the operation panel
- In addition to managing the condition of ancillary equipment using M2M, dryers and temperature controllers can also be controlled from the moulding machine's control panel. This contributes to space-saving for our customers' moulding machine peripheral equipment.
Products
| Clamping system | Direct Pressure |
|---|---|
| Max. clamping force (kN) | 98 |
| Tie bar distance W×L (mm) | 170 x 170 |
| Platen Dimensions W×L (mm) | 300 x 315 |
| Open daylight (Min. mould thickness + Max. stroke) (mm) | 300 |
| Min. mould thickness/Max. mould thickness (mm) | 120/ー |
| Plasticization and Injection System | Screw Pre-plasticizing |
| Screw diameter （mm） | 14 | 18 |
| Plunger diameter （mm） | 8 | 12 |
| Max. injection pressure （MPa） | 197 | 288 |
| Theoretical injection volume (cm<sup>3</sup>) | 2 | 4.5 |
| Injection rate (cm<sup>3</sup>/s) | 75 | 146 |
| Max. injection speed （mm/s） | 1500 | 1300 |
| Plasticating capacity （kg/h） | 3.3 | 6.5 |
| Machine size L×W×H (mm) | 2018 x 687 x 1715 |
| Machine weight （kg） | 1300 |
| Drive system | Electric Hybrid |