Global Gateway link

ContactContact

YouTube

MS200

Based on high accuracy and stable molding by V-LINE®, Developed

  • ms200

* The picture shown may slightly differ from the actual machine.

Main Features

Electric V-LINE®
The injection and plasticizing apparatus using the V-LINE® system, with characteristics that ensure precise reproducibility, is now powered by a servomotor. Measurements and positioning data for the injection locations are controlled in a closed loop to improve the precision of positioning, achieving remarkably stable repetitions of the plasticizing, measuring, and injection cycle. The line of injection units with plungers of 40 mm and 50 mm in diameters include models that emphasize speed and models that emphasize pressure, allowing you to choose the unit that best suits the molded product type.
Electric clamping action
With the servo motor drive and adoption of the mold clamping device by the original toggle link mechanism shortened the mold opening and closing cycle. The movable platen is supported by a linear guide to improve the stability of the mold orientation. The power design for these products significantly reduces power usage while contributing to quieter operation.
Operation panel focused on intuition
Offering selector type switches, the control panel has been developed especially for the MS200. The ability to move the switches in the same direction in which you want each unit to move results in a more intuitive operating experience and helps simplify molding operations.

Movie

Products

Clamping systemDouble Toggle
Max. clamping force (kN)1960
Tie bar distance W×L (mm)560 x 560
Platen Dimensions W×L (mm)720 x 720
Open daylight (Min. mold thickness + Max. stroke) (mm)1000
Min. mold thickness/Max. mold thickness (mm)250 / 550
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)40 | 40 | 50 | 50
Plunger diameter (mm)40 | 40 | 50
Max. injection pressure (MPa)200 | 275 | 200
Theoretical injection volume (cm3)251.3 | 392.7
Injection rate (cm3/s)377 | 251 | 393
Max. injection speed (mm/s)300 | 200 | 200
Plasticating capacity (kg/h)85 | 60 | 100 | 100
Machine size L×W×H (mm)5150 x 1445 x 2307
Machine weight (kg)8400
Mold Clamping Force Classification200-499
Drive systemelectric

Contact Us

Related Information