GL60-LSR
An injection molding machine for liquid thermosetting resins ranging from low to high viscosity. Direct-pressure clamping and a specially designed V-LINE® system achieve high-quality, high-precision molding.
* The picture shown may slightly differ from the actual machine.
Main Features
- Stable molding by V–LINE®
- Equipped with the unique V-LINE® which realizes accurate plastic injection with high repeatability. Fills the mold with a constant amount of resin during injection without backflow, by an accurate weighing mechanism and simple & rational backflow prevention mechanism.
- Equipped with LIM dedicated unit
- The V-LINE® is designed only for thermosetting, and supports each of the thermosetting resins from super-low viscosity to high viscosity. The resin flow path of each part is designed shorter so that it can be disassembled more easily, which provides excellent maintainability.
- Electric hybrid direct pressure mold clamping
- Combined with an open/close mold clamping mechanism which realizes accurate position control by an electronic system, and a mold clamping mechanism which performs constant mold clamping by a hydraul ic system. Particularly, since the mold clamping force is distributed uniformly by a hydraulic cylinder, the mold is clamped uniformly which realizes high precision molding.
Products
| Clamping system | Locking Direct Pressure |
|---|---|
| Max. clamping force (kN) | 588 |
| Tie bar distance W×L (mm) | 360 x 320 |
| Platen Dimensions W×L (mm) | 520 x 460 |
| Open daylight (Min. mould thickness + Max. stroke) (mm) | 650 |
| Min. mould thickness/Max. mould thickness (mm) | 200/390 |
| Plasticization and Injection System | Feed screw & Plunger |
| Screw diameter （mm） | 14 | 22 | 28 |
| Plunger diameter （mm） | 12 | 16 | 22 | 28 | |
| Max. injection pressure （MPa） | 288 | 262 | 260 | 240 |
| Theoretical injection volume (cm<sup>3</sup>) | 4.5 | 14 | 27 | 83 |
| Injection rate (cm<sup>3</sup>/s) | 22 | 40 | 76 | 123 |
| Max. injection speed （mm/s） | 200 |
| Machine size L×W×H (mm) | 3685 x 1136 x 1679 |
| Machine weight （kg） | 2800 |
| Mould Clamping Force Classification | 20-99 |
| Drive system | Electric Hybrid |
| Applicable material viscosity(Pa・s) | 100～（Medium, high viscosity） |