GL100-LSR
Injection molding machine for liquid thermosetting plastics from low viscosity to high viscosity Realized high precision and high quality LIM molding by exclusively designed V-LINE® and direct pressure mold clamping
* The picture shown may slightly differ from the actual machine.
Main Features
- Stable molding by V–LINE®
- Equipped with the unique V-LINE® which realizes accurate plastic injection with high repeatability. Fills the mold with a constant amount of resin during injection without backflow, by an accurate weighing mechanism and simple & rational backflow prevention mechanism.
- Equipped with LIM dedicated unit
- The V-LINE® is designed only for thermosetting, and supports each of the thermosetting resins from super-low viscosity to high viscosity. The resin flow path of each part is designed shorter so that it can be disassembled more easily, which provides excellent maintainability.
- Electric hybrid direct pressure mold clamping
- Combined with an open/close mold clamping mechanism which realizes accurate position control by an electronic system, and a mold clamping mechanism which performs constant mold clamping by a hydraul ic system. Particularly, since the mold clamping force is distributed uniformly by a hydraulic cylinder, the mold is clamped uniformly which realizes high precision molding.
Stuffer Box Special Site
Products
Clamping system | Locking Direct Pressure |
---|---|
Max. clamping force (kN) | 980 |
Tie bar distance W×L (mm) | 460 x 420 |
Platen Dimensions W×L (mm) | 640 x 610 |
Open daylight (Min. mould thickness + Max. stroke) (mm) | 800 |
Min. mould thickness/Max. mould thickness (mm) | 250/550 |
Plasticization and Injection System | Feed screw & Plunger |
Screw diameter (mm) | 28 |
Plunger diameter (mm) | 28 |
Max. injection pressure (MPa) | 240 |
Theoretical injection volume (cm<sup>3</sup>) | 83 |
Injection rate (cm<sup>3</sup>/s) | 123 |
Max. injection speed (mm/s) | 200 |
Machine size L×W×H (mm) | 4030 x 1227 x 1792 |
Machine weight (kg) | 3100 |
Mould Clamping Force Classification | 100-199 |
Drive system | Electric Hybrid |
Applicable material viscosity(Pa・s) | 100~(Medium, high viscosity) |