Global Gateway link

ContactContact

YouTube

HC03VRE

Flexibly responds to various types of small precision parts and quick delivery Ultra-high cycle, ultra-compact, ultra-stable injection molding machine

  • hc03vre

* The picture shown may slightly differ from the actual machine.

Main Features

Stable molding by V-LINE®
The V-LINE® is the plasticization and injection unit which enables stable measurement and injection, realized by eliminating the destabilizing factors during the plasticization measurement and injection, by separating the plasticization and injection. Accordingly, the molding of small precision parts which require advanced technology, can be performed stably even at a high-cycle.
Electromotive direct pressure clamping system
The adoption of the four tie bars ensures excellent straightness and high rigidity, where the mold clamping force is distributed uniformly. The load reduced by applying an optimal contact pressure to the mold by stable mold closing and mold clamping, reduces maintenance and improves the life of the mold.
Ultra-high cycle molding
The clamping system which performs mold closing and mold clamping in one motion, and a belt driven rotary table, realized 0.9 seconds per cycle. (0.3 seconds each for mold closing, mold clamping, table rotation, and mold opening)
* With two-sided lower mold of 36 kg, and mold opening/closing stroke of 80 mm
* Equivalent to dry operation

Movie

Products

Clamping systemElectric Servo Ball Screw
Max. clamping force (kN)29.4
Open daylight (Min. mold thickness + Max. stroke) (mm)300
Min. mold thickness/Max. mold thickness (mm)150
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)14
Plunger diameter (mm)8 | 12
Max. injection pressure (MPa)197
Theoretical injection volume (cm3)2 | 4.5
Injection rate (cm3/s)25 | 45
Max. injection speed (mm/s)500 | 400
Plasticating capacity (kg/h)5
Machine size L×W×H (mm)1625 x 1178 x 2600
Machine weight (kg)1900
Mold Clamping Force Classification1-19
Drive systemElectric Hybrid
Table diameter (mm)460
Maximum die dimensions L×W (mm)200×150

Contact Us

Related Information