Global Gateway link

ContactContact

YouTube

TR20VRE

Realizes High Yields of Insert Molding V-LINE® and locking direct pressure method. The rotary table which accurately stops in position expands the prospects of automation.

  • tr20vre

* The picture shown may slightly differ from the actual machine.

Main Features

Stable Molding Enabled by V-LINE®
The V-LINE® consists of a plasticization and injection unit which enables stable measurement and injection, realized by eliminating the destabilizing factors during the plasticization measurement and injection, by separating the plasticization and injection. Sodick's original control technology enables plasticization and injection control at optimal timing.
Locking Direct-pressure Mold Clamping
The well-balanced arrangement of the three hydraulic cylinders for mold opening and closing with the movable platen connected to tie-bars realizes excellent straightness, and the locking direct pressure generates a high mold clamping force with uniform repeatability. The electric servo driven rotary table realizes excellent stop position accuracy and high speed.
Space-saving and Improved Workability
The height of the table was made lower than the conventional machine in order to improve the workability.
The V-LINE® with a shorter mechanism even made the overall height of the machine lower which realized space savings.

Products

Clamping systemDirect Pressure
Max. clamping force (kN)196
Open daylight (Min. mold thickness + Max. stroke) (mm)400
Min. mold thickness/Max. mold thickness (mm)200
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)14 | 18 | 22
Plunger diameter (mm)12 | 16 | 22
Max. injection pressure (MPa)288 | 262 | 256
Theoretical injection volume (cm3)4.5 | 14 | 27
Injection rate (cm3/s)45 | 80 | 114
Max. injection speed (mm/s)400 | 300
Plasticating capacity (kg/h)5 | 13 | 18
Machine size L×W×H (mm)2090 x 1478 x 2750
Machine weight (kg)2700
Mold Clamping Force Classification20-99
Drive systemElectric Hybrid
Table diameter (mm)800
Maximum die dimensions L×W (mm)250×250

Contact Us

Related Information