Global Gateway link

ContactContact

YouTube

TR150VRE

Realizes High Yields of Insert Molding V-LINE® and locking direct pressure method. The rotary table which accurately stops in position expands the prospects of automation.

  • tr150vre

* The picture shown may slightly differ from the actual machine.

Main Features

Stable molding by V-LINE®
The V-LINE® consists of a plasticization and injection unit which enables stable measurement and injection, realized by eliminating the destabilizing factors during the plasticization measurement and injection, by separating the plasticization and injection. Sodick's original control technology enables plasticization and injection control at optimal timing.
Locking Direct-pressure Mold Clamping
The well-balanced arrangement of the three hydraulic cylinders for mold opening and closing with the movable platen connected to tie-bars realizes excellent straightness, and the locking direct pressure generates a high mold clamping force with uniform repeatability. The electric servo driven rotary table realizes excellent stop position accuracy and high speed.
Space-saving and Improved Workability
The height of the table was made lower than the conventional machine in order to improve the workability.
The V-LINE® with a shorter mechanism even made the overall height of the machine lower which realized space savings.

Products

Clamping systemLocking Direct Pressure
Max. clamping force (kN)1470
Open daylight (Min. mold thickness + Max. stroke) (mm)700
Min. mold thickness/Max. mold thickness (mm)300
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)32 | 40
Plunger diameter (mm)32 | 40
Max. injection pressure (MPa)234 | 219.5
Theoretical injection volume (cm3)108 | 251.2
Injection rate (cm3/s)376.8 | 589
Max. injection speed (mm/s)300
Plasticating capacity (kg/h)85 | 100
Machine size L×W×H (mm)3329 x 1854 x 4217
Machine weight (kg)10300
Mold Clamping Force Classification100-199
Drive systemElectric Hybrid
Table diameter (mm)1500
Maximum die dimensions L×W (mm)525×525

Contact Us

Related Information