Global Gateway link

ContactContact

YouTube

LS75VRE

Injection molding machine for liquid thermosetting plastics from low viscosity to high viscosity Realized high precision and high quality molding by exclusively designed V-LINE® and direct pressure mold clamping

  • ls75vre

* The picture shown may slightly differ from the actual machine.

Main Features

Stable Molding Enabled by V-LINE®
Sodick's V-LINE® system is a plasticization/injection system that separates the plasticization and injection processes to ensure stable measurement and injection by removing unstable elements during plasticization, measurement, and injection. It has been combined with proprietary Sodick control technology to control the plasticization and injection processes in the optimum timing. LS40EHV is an injection molding machine that provides high accuracy and reproducibility, boasting cumulative sales of over 11,000 units.
Features Designated LIM Unit
The V-LINE® system employed in Sodick’s injection molding machines for thermosetting resins is a type designed for liquid injection molding (LIM). V-LINE®’s simple, rational backflow prevention mechanism fills the die stably using a measured amount of material with no backflow. Furthermore, the short flow channels of liquid injection molding units enable easy disassembly, reassembly, and maintenance.
Features Designated LIM Unit
The V-LINE® system employed in Sodick’s injection molding machines for thermosetting resins is a type designed for liquid injection molding (LIM). V-LINE®’s simple, rational backflow prevention mechanism fills the die stably using a measured amount of material with no backflow.
Furthermore, the short flow channels of liquid injection molding units enable easy disassembly, reassembly, and maintenance.

Products

Clamping systemLocking Direct Pressure
Max. clamping force (kN)735
Open daylight (Min. mold thickness + Max. stroke) (mm)500
Min. mold thickness/Max. mold thickness (mm)250
Plasticization and Injection SystemFeed screw & Plunger
Screw diameter (mm)28
Plunger diameter (mm)22
Max. injection pressure (MPa)20
Theoretical injection volume (cm3)27
Injection rate (cm3/s)123 | 160
Max. injection speed (mm/s)10
Machine size L×W×H (mm)2934 x 1446 x 3244
Machine weight (kg)5000
Mold Clamping Force Classification20-99
Drive systemElectric Hybrid

Contact Us

Related Information