Global Gateway link



Based on high accuracy and stable molding by V-LINE®, Developed

  • ms50

* The picture shown may slightly differ from the actual machine.

Main Features

Electric V-LINE®
The injection and plasticizing apparatus using the V-LINE® system, with characteristics that ensure precise reproducibility, is now powered by a servomotor. Measurements and positioning data for the injection locations are controlled in a closed loop to improve the precision of positioning, achieving remarkably stable repetitions of the plasticizing, measuring, and injection cycle. The line of injection units with plungers of 22 mm and 28 mm in diameters include models that emphasize speed and models that emphasize pressure, allowing you to choose the unit that best suits the molded product type.
Electric clamping action
With the servo motor drive and adoption of the mold clamping device by the original toggle link mechanism shortened the mold opening and closing cycle. The movable platen is supported by a linear guide to improve the stability of the mold orientation. The power design for these products significantly reduces power usage while contributing to quieter operation.
Operation panel focused on intuition
Offering selector type switches, the control panel has been developed especially for the MS50. The ability to move the switches in the same direction in which you want each unit to move results in a more intuitive operating experience and helps simplify molding operations.


Clamping systemDouble Toggle
Max. clamping force (kN)490
Tie bar distance W×L (mm)360 x 360
Platen Dimensions W×L (mm)500 x 500
Open daylight (Min. mold thickness + Max. stroke) (mm)600
Min. mold thickness/Max. mold thickness (mm)150 / 350
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)22 | 25 | 28 | 28
Plunger diameter (mm)22 | 22 | 28 | 28
Max. injection pressure (MPa)220 | 285 | 175 | 235
Theoretical injection volume (cm3)53.2 | 98.5
Injection rate (cm3/s)171 | 133 | 216 | 154
Max. injection speed (mm/s)450 | 350 | 350 | 250
Plasticating capacity (kg/h)14 | 9 | 20 | 13 | 35 | 24 | 35 | 24
Machine size L×W×H (mm)3725 x 1155 x 1970.5
Machine weight (kg)3000
Mold Clamping Force Classification20-99
Drive systemelectric

Contact Us

Related Information