Global Gateway link

ContactContact

YouTube

LP20EH3

Broadly expands the range of the precision molding items field, including precision, electronics, optics, and medical instruments V-LINE® high response injection model

  • lp20eh3

* The picture shown may slightly differ from the actual machine.

Main Features

V-LINE® LDDV Equipped Machine
The overwhelming hydraulic power realized by adopting the LDDV (Linear Direct Drive Valve) for the injection control valve, which demonstrates impressive precision measurements and high responsiveness by the independently developed V-LINE® that has been achieving advanced precision and stable molding with accuracy and repeatability, expands the molding range of small precision components.
Overwhelming Injection Acceleration/Deceleration Speed
The low inertia plunger and LDDV realized the industry’s highest level injection acceleration of 15G (with a P12 plunger diameter). The independently developed controller also demonstrates optimal and complete control of the injection plunger.
Outstanding Injection Performance
This machine responds to the various demands in the molding of small precision components, where the molding difficulty is continuously increasing more than ever, such as further reductions in the thickness and weight, increases in extreme changes in the dimensions and shapes with excellent injection performance, including quick acceleration, injection followability, and sharp braking.

Products

Clamping systemDirect Pressure
Max. clamping force (kN)196
Tie bar distance W×L (mm)310 x 260
Platen Dimensions W×L (mm)430 x 360
Open daylight (Min. mold thickness + Max. stroke) (mm)400
Min. mold thickness/Max. mold thickness (mm)150
Plasticization and Injection SystemScrew Pre-plasticizing
Screw diameter (mm)14 | 18
Plunger diameter (mm)12 | 16
Max. injection pressure (MPa)288 | 262
Theoretical injection volume (cm3)4.5 | 14.1
Injection rate (cm3/s)146 | 160
Max. injection speed (mm/s)1300 | 800
Plasticating capacity (kg/h)3.5 | 6.5
Machine size L×W×H (mm)2629 x 925 x 1681
Machine weight (kg)2100
Mold Clamping Force Classification20-99
Drive systemElectric Hybrid

Contact Us

Related Information