Injection molding machine for liquid thermosetting plastics from low viscosity to high viscosity Realized high precision and high quality LIM molding by exclusively designed V-LINE® and direct pressure mold clamping
* The picture shown may slightly differ from the actual machine.
- Stable molding by V–LINE®
- Equipped with the unique V-LINE® which realizes accurate plastic injection with high repeatability. Fills the mold with a constant amount of resin during injection without backflow, by an accurate weighing mechanism and simple & rational backflow prevention mechanism.
- Equipped with LIM dedicated unit
- The V-LINE® is designed only for thermosetting, and supports each of the thermosetting resins from super-low viscosity to high viscosity. The resin flow path of each part is designed shorter so that it can be disassembled more easily, which provides excellent maintainability.
- Electric hybrid direct pressure mold clamping
- Combined with an open/close mold clamping mechanism which realizes accurate position control by an electronic system, and a mold clamping mechanism which performs constant mold clamping by a hydraul ic system. Particularly, since the mold clamping force is distributed uniformly by a hydraulic cylinder, the mold is clamped uniformly which realizes high precision molding.
|Clamping system||Locking Direct Pressure|
|Max. clamping force (kN)||294 *1|
|Tie bar distance W×L (mm)||310 x 310|
|Platen Dimensions W×L (mm)||440 x 440|
|Open daylight (Min. mold thickness + Max. stroke) (mm)||550|
|Min. mold thickness/Max. mold thickness (mm)||150/360|
|Plasticization and Injection System||Feed screw & Plunger|
|Screw diameter （mm）||14 | 22|
|Plunger diameter （mm）||12 | 16 | 22|
|Max. injection pressure （MPa）||288 | 262 | 260|
|Theoretical injection volume (cm3)||4.5 | 14 | 27|
|Injection rate (cm3/s)||22 | 40 | 76|
|Max. injection speed （mm/s）||200|
|Machine size L×W×H (mm)||3150 x 1030 x 1679|
|Machine weight （kg）||2000|
|Mold Clamping Force Classification||20-99|
|Drive system||Electric Hybrid|
|Applicable material viscosity(Pa・s)||100～（Medium, low viscosity）|