Global Gateway link

ContactContact

YouTube

GL30-LS

Provides high-quality, high-precision liquid injection molding using direct-pressure clamping and Sodick’s V-LINE® system specially designed for low-viscosity liquid thermosetting injection molding machines.

  • gl30-ls

* The picture shown may slightly differ from the actual machine.

Main Features

Stable molding by V–LINE®
Equipped with the unique V-LINE® which realizes accurate plastic injection with high repeatability. Fills the mold with a constant amount of resin during injection without backflow, by an accurate weighing mechanism and simple & rational backflow prevention mechanism.
Equipped with LIM dedicated unit
The V-LINE® is designed only for thermosetting, and supports each of the thermosetting resins from super-low viscosity to high viscosity. The resin flow path of each part is designed shorter so that it can be disassembled more easily, which provides excellent maintainability.
Electric hybrid direct pressure mold clamping
Combined with an open/close mold clamping mechanism which realizes accurate position control by an electronic system, and a mold clamping mechanism which performs constant mold clamping by a hydraul ic system. Particularly, since the mold clamping force is distributed uniformly by a hydraulic cylinder, the mold is clamped uniformly which realizes high precision molding.

Products

Clamping systemLocking Direct Pressure
Max. clamping force (kN)294〔392〕 *1
Tie bar distance W×L (mm)310 x 310
Platen Dimensions W×L (mm)440 x 440
Open daylight (Min. mold thickness + Max. stroke) (mm)550
Min. mold thickness/Max. mold thickness (mm)150 / 360
Plasticization and Injection SystemFeed screw & Plunger
Screw diameter (mm)22
Plunger diameter (mm)16 | 22
Max. injection pressure (MPa)40 | 20
Theoretical injection volume (cm3)14 | 27
Injection rate (cm3/s)2 | 3.8
Max. injection speed (mm/s)10
Machine size L×W×H (mm)3150 x 1064 x 1679
Machine weight (kg)2000
Mold Clamping Force Classification20-99
Drive systemElectric Hybrid
Applicable material viscosity(Pa・s)1~(low viscosity)

Contact Us

Related Information