GL200-HSP
V–LINE® high-speed/high-pressure injection model for expanded range of applications.Enables production of a wide range of precision moulded products for applications such as precision instruments, electronics, optics, and medical equipment.
* The picture shown may slightly differ from the actual machine.
Main Features
- Servo Valve for V-LINE® Flow Rate Control
- The V-LINE® system developed by Sodick provides advanced precision moulding with high stability, accuracy, and reproducibility. GL200-HSP's injection control valve is a V-LINE®-driven linear servo valve ensuring precise measurement and high flow rates. The outstanding hydraulic power it provides enables moulding of an extended range of moulded precision parts for small products.
- Outstanding Injection Acceleration/Deceleration
- A low-inertia plunger and high flow-rate linear servo provide an injection acceleration of 22 G (with plunger diameter P28), one of the highest acceleration values available industry-wide. A proprietary Sodick controller provides complete, optimum control of the injection plunger.
- Superior Injection Performance
- Today’s precision parts for small products call for increasingly difficult moulding processes to produce thinner walls, lighter weights, and increasingly extreme dimensions and shape changes. GL200-HSP’s sharp acceleration, precise injection tracking, and crisp braking provide the outstanding injection performance needed to meet these demands.
Products
Clamping system | Locking Direct Pressure |
---|---|
Max. clamping force (kN) | 1960 |
Tie bar distance W×L (mm) | 560 x 560 |
Platen Dimensions W×L (mm) | 680 x 680 |
Open daylight (Min. mould thickness + Max. stroke) (mm) | 950 |
Min. mould thickness/Max. mould thickness (mm) | 300/650 |
Plasticization and Injection System | Screw Pre-plasticizing |
Screw diameter (mm) | 28 |
Plunger diameter (mm) | 28 |
Max. injection pressure (MPa) | 343 | 420 |
Theoretical injection volume (cm<sup>3</sup>) | 83 | 61.5 |
Injection rate (cm<sup>3</sup>/s) | 923 | 615 |
Max. injection speed (mm/s) | 1500 | 1000 |
Plasticating capacity (kg/h) | 30 |
Machine size L×W×H (mm) | 5275 x 1360 x 1990 |
Machine weight (kg) | 5900 |
Mould Clamping Force Classification | 200-499 |
Drive system | Electric Hybrid |