GL150-HSP
V–LINE® high-speed/high-pressure injection model for expanded range of applications.Enables production of a wide range of precision molded products for applications such as precision instruments, electronics, optics, and medical equipment.
* The picture shown may slightly differ from the actual machine.
Main Features
- Servo Valve for V-LINE® Flow Rate Control
- The V-LINE® system developed by Sodick provides advanced precision molding with high stability, accuracy, and reproducibility. GL150-HSP's injection control valve is a V-LINE®-driven linear servo valve ensuring precise measurement and high flow rates. The outstanding hydraulic power it provides enables molding of an extended range of molded precision parts for small products.
- Outstanding Injection Acceleration/Deceleration
- A low-inertia plunger and high flow-rate linear servo provide an injection acceleration of 22 G (with plunger diameter P28), one of the highest acceleration values available industry-wide. A proprietary Sodick controller provides complete, optimum control of the injection plunger.
- Superior Injection Performance
- Today’s precision parts for small products call for increasingly difficult molding processes to produce thinner walls, lighter weights, and increasingly extreme dimensions and shape changes. GL150-HSP’s sharp acceleration, precise injection tracking, and crisp braking provide the outstanding injection performance needed to meet these demands.
Products
| Clamping system | Locking Direct Pressure |
|---|---|
| Max. clamping force (kN) | 1472 |
| Tie bar distance W×L (mm) | 560 x 520 |
| Platen Dimensions W×L (mm) | 720 x 680 |
| Open daylight (Min. mold thickness + Max. stroke) (mm) | 900 |
| Min. mold thickness/Max. mold thickness (mm) | 250/600 |
| Plasticization and Injection System | Screw Pre-plasticizing |
| Screw diameter （mm） | 28 |
| Plunger diameter （mm） | 28 |
| Max. injection pressure （MPa） | 343 | 420 |
| Theoretical injection volume (cm3) | 83 | 61.5 |
| Injection rate (cm3/s) | 932 | 615 |
| Max. injection speed （mm/s） | 1500 | 1000 |
| Plasticating capacity （kg/h） | 30 |
| Machine size L×W×H (mm) | 5170 x 1378 x 1878 |
| Machine weight （kg） | 5300 |
| Mold Clamping Force Classification | 100-199 |
| Drive system | Electric Hybrid |