GL100-HSP
V–LINE® high-speed/high-pressure injection model for expanded range of applications.Enables production of a wide range of precision molded products for applications such as precision instruments, electronics, optics, and medical equipment.
* The picture shown may slightly differ from the actual machine.
Main Features
- Servo Valve for V-LINE® Flow Rate Control
- The V-LINE® system developed by Sodick provides advanced precision molding with high stability, accuracy, and reproducibility. GL100-HSP's injection control valve is a V-LINE®-driven linear servo valve ensuring precise measurement and high flow rates. The outstanding hydraulic power it provides enables molding of an extended range of molded precision parts for small products.
- Outstanding Injection Acceleration/Deceleration
- A low-inertia plunger and high flow-rate linear servo provide an injection acceleration of 22 G (with plunger diameter P28), one of the highest acceleration values available industry-wide. A proprietary Sodick controller provides complete, optimum control of the injection plunger.
- Superior Injection Performance
- Today’s precision parts for small products call for increasingly difficult molding processes to produce thinner walls, lighter weights, and increasingly extreme dimensions and shape changes. GL100-HSP’s sharp acceleration, precise injection tracking, and crisp braking provide the outstanding injection performance needed to meet these demands.
Products
| Clamping system | Locking Direct Pressure |
|---|---|
| Max. clamping force (kN) | 980 |
| Tie bar distance W×L (mm) | 460 x 420 |
| Platen Dimensions W×L (mm) | 640 x 610 |
| Open daylight (Min. mould thickness + Max. stroke) (mm) | 800 |
| Min. mould thickness/Max. mould thickness (mm) | 250/550 |
| Plasticization and Injection System | Screw Pre-plasticizing |
| Screw diameter （mm） | 28 |
| Plunger diameter （mm） | 28 |
| Max. injection pressure （MPa） | 343 |
| Theoretical injection volume (cm<sup>3</sup>) | 83 |
| Injection rate (cm<sup>3</sup>/s) | 923 |
| Max. injection speed （mm/s） | 1500 |
| Plasticating capacity （kg/h） | 30 |
| Machine size L×W×H (mm) | 4714 x 1196 x 1792 |
| Machine weight （kg） | 3400 |
| Mould Clamping Force Classification | 100-199 |
| Drive system | Electric Hybrid |