Product: B to B connector (4 pieces)
Material: LCP
Model: LP20EH4 (P12/S14)

Micro products with fine or thin-walled shapes. Small volume product.

Total length: approx. 8 mm

Pin hole spacing of 0.3mm

Product: Automotive connector (4 pieces)
Material: PBT
Model: MS50G2 AI-VENT

Semi-hot runner is used

• The V-line, in which the screw does not move, allows moulding without venting up, eliminates the need for a drying process, and significantly reduces power consumption.
• At the same time, it contributes to the removal of moisture and gases that contaminate moluds.

Moulded product: Food container
　(wall thickness 0.6mm x 2 cavities)
One full hot runner valve gate

Material: CA (cellulose acetate) + inert gas (nitrogen or carbonic acid)
Model: MS100G2 INFILT-V^®
Uses marine biodegradable plastic that is food contactable and microwavable

Uses inert gas dissolution technology to improve the flowability of biodegradable plastics. Eco-friendly method that does not use chemical plasticizers and is compatible with food contact applications. Counter-pressure moulding reduces appearance swirl marks.

Product: Imaged product for automotive rechargeable battery cushioning material
(approx. 90 x 300 x 0.8 mm thin plate with protrusions)
Material: Liquid silicone Asahi Kasei Wacker
　　　　ELASTOIL LR3003/50
Model: MS150G2-LSR

Cold runner, valve gate type

Batteries obtain the desired voltage and capacity by connecting multiple units called cells, which are installed between the cells to absorb shock, insulate, and prevent the spread of fire.
Thin-walled silicone moulding technology enables stable moulding of smooth burr-free products.
We exhibit products that are ideal as cushioning and insulation between cells for FCVs and BEVs in the automotive industry.

Vertical machine downsizing and space savings.