AP350L(oil)
Oil machining performance in the fine and precision ranges,
responds to the various needs of molds related to motor cores and electronic devices
/AP350L_右斜_20190725.jpg)
* The picture shown may slightly differ from the actual machine.
Main Features
- Highly Rigid Symmetric Gantry Structure
- The adoption of ceramic parts including a symmetric gantry structure, arm suspension structure, and insulated work table, and linear motor drive which realizes high-speed and dynamic responsiveness, minimizes the machine displacement caused by the shifting of weight.
- Standardly Equipped Super Finish & High-speed Machining Circuit
- The super finish circuit "Super PIKA Oil" enables excellent surface roughness. The "High-speed Eco-Cut O-Plus" reduces machining time and the number of cuts at Rz 1 um or less. Since its release in 1981, Sodick's oil machining wire-cut EDMs have played a successful role in numerous sites.
- Prolonged Automatic Operation
- The automatic wire threading unit "FJ-AWT" with a high wire threading rate supports automatic operation. The Sodick-IoT "S-Viewer" enables centralized remote control and analysis, which supports improvement in productivity.
Automation System Special Site
Products
| Axis stroke X×Y×Z (mm) | 350 x 350 x 120 |
|---|---|
| U x V axis travel (mm) | 35 x 35 |
| Max. taper angle | ±7°（plate thickness：100mm） |
| Max. workpiece dimensions（During submerged machining） W x D x H (mm) | 540 x 500 x 100 |
| Max. weight of workpiece（During submerged machining）（kg） | 100 |
| Wire electrode diameter (mm) | 0.05 ～ 0.25 |
| Wire tension (N) | 3 ～ 25 |
| Maximum wire feed rate (mm/sec) | 250 |
| Distance from floor surface to upper surface of table (mm) | 1084 |
| Machine tool dimensions W x D x H (mm) | 1985 x 2095 x 2160 |
| Machine installation dimensions W x D (mm) | 3705 x 3515 *1 |
| Total unit weight（kg） | 4650 *2 |
| Total power input | 3-phase 50/60Hz 13 kVA |