AL800G
Achieving the superlative performance with in-house developed core technologies Advanced Smart Pulse & Advanced Smart Linear
* The picture shown may slightly differ from the actual machine.
Main Features
- 4-axis linear motor drive
- Direct drive method without a ball screw was established, utilizing a high performance linear motor developed and manufactured in-house for the 4 axes of X, Y, U and V. Precise axis movements without backlash can be maintained semi-permanently. Demonstrates accurate position control and excellent discharge characteristics while machining, through the high response and high following characteristics which are the features of the linear motor.
- New Power Supply Unit& New Machining Circuit
- Providing the improved visibility and operability
with the latest man-machine interface achieved
by the 19" horizontal touch-panel.
This machine is standardly equipped with the "barrel-free effect control Ⅱ" which greatly reduces the barrel amount during machining, and "TMP Control Ⅱ" which improves the surface roughness of the second cut and realizes high speed finish machining. - Large and Thick Workpiece Machining
- The AL800G/ALN800G supports a 500mm
workpiece thcickness machining standard. It
equipped with the automatic vertically sliding
door, the "O-shape" work-stand, and ceramics
made stand-bases.
The high speed automatic wire threading unit (FJ-AWT) and the built-in 20kg wire feeder enables unattended high speed and high precision machining.
Products
Axis stroke X×Y×Z (mm) | 800 x 600 x 500 |
---|---|
U x V axis travel (mm) | 200 x 200 |
Max. taper angle | ± 25 °(plate thickness:130 mm) |
Max. workpiece dimensions(During flushing machining) W x D x H (mm) | 1250 x 1020 x 500 |
Max. weight of workpiece(During flushing machining)(kg) | 3000 |
Wire electrode diameter (mm) | 0.1 ~ 0.3 |
Wire tension (N) | 3 ~ 23 |
Maximum wire feed rate (mm/sec) | Max. 420 mm/sec |
Distance from floor surface to upper surface of table (mm) | 995 |
Machine tool dimensions W x D x H (mm) | 3395 x 3640 x 2780 *1 |
Machine installation dimensions W x D (mm) | 4675 x 5050 |
Total unit weight(kg) | 6000 *2 |
Total power input | 3-phase 50/60 Hz 13 kVA *3 |