MR30 Award
High productivity is achieved through a peripheral device package and 3D cooling pipes built into injection molds.
* The picture shown may slightly differ from the actual machine.
Main Features
- OPM Mold Dedicated Machine
- This is an electric type cell production system only for OPM molds which supports various types of small lot production, integrated with built-in 3D cooling pipes molded with a precision metal 3D printer. The system is standardly equipped with two temperature controllers, which enables ideal local temperature control by two line mold temperature control piping. The cooling effect during molding is demonstrated to the utmost which drastically reduces the molding cycle, minimizes deformation and improves the yield.
- All-in-One
- The adoption of a unique cassette molding structure equipped with an OPM mold overwhelmingly reduces the mold replacement time. This all-in-one and compact system is structured with the functions required for molding and sufficient peripheral device capabilities, which minimized the equipment area required for molding.
- Centralized Control
- Just one operation panel provides an operation environment with excellent usability which sends commands to control the overall system, including the peripheral devices. Performing central control by acquiring the molding data and data related to the peripheral devices into the latest controller developed in-house, enhances the IoT functions including smart control and labor savings, and promotes global applications.
Movie
Awards
- Nikkan Kogyo Shimbunsha, Japan Machine Tools Builders’ Association (JMTBA) Award, 47th (2017) Industrial Machine Design Special Awards
Products
Clamping system | Toggle Link Formula |
---|---|
Max. clamping force (kN) | 294 |
Tie bar distance W×L (mm) | 360 x 360 |
Platen Dimensions W×L (mm) | 500 x 500 |
Open daylight (Min. mould thickness + Max. stroke) (mm) | 625 |
Min. mould thickness/Max. mould thickness (mm) | 455 |
Plasticization and Injection System | Screw Pre-plasticizing |
Screw diameter (mm) | 25 |
Plunger diameter (mm) | 22 |
Max. injection pressure (MPa) | 180 |
Theoretical injection volume (cm<sup>3</sup>) | 27 |
Injection rate (cm<sup>3</sup>/s) | 57 |
Max. injection speed (mm/s) | 150 |
Plasticating capacity (kg/h) | 15 |
Machine size L×W×H (mm) | 2653 x 1462 x 2250 |
Machine weight (kg) | 2000 |
Mould Clamping Force Classification | 20-99 |
Drive system | electric |